ALLOPAR SPOT LIFTER-2
ALLOPAR LLC SPOT LIFTER-2
Contents under pressure. Do not puncture or incinerate container. International misuse by deliberately inhaling concentrated vapors may be harmful or fatal. Keep away for hear. sparks and flame. Do not throw in a fire as con-tainer will burst. Use only with adequate ventilation. Avoid prolonged breathing ov vapor and prolonged contact with skin. Contains Methylene Chloride and perchloroethylene which have been shown to cause cancer in laboratory animals. Risk to your health depends on level and duration of exposure.
FOR INDUSTRIAL USE ONLY:
This product is intended for use in manufacturing operations only. In certain states. it is not allowed for retail sale.
Methylene Chloride (75-09-2). Perchloroethylene (127-18-4). Methylal (109-87-5). Hydrated. Amorphous Silica (112926-00-8). Propane/nButane Blend (68476-86-8).
Excellent cleanability and easy spot removal. Prevention of transformation or oil spot spread on textile. Quick drying ensuring high efficiency.
HOW TO USE:
Shake it before spraying. Keep 10cm-20cm away from target object and spray the product evenly. Brush white powders remained after vaporization of sprayed product (for about 10 minutes) and spot will be removed.
Do not use it near fire. Use it in the well-ventialted place. Do not keep it in the place above 120F (50C). Do not use it toward fire. Do not use near heater or stove. Do not use in the room using fire. Do not Keep it in the place above 40 C. Provide ventilation when use in the closed room. Do not throw it away into fire. Punch the can before throw it away. Do not Keep it in the closed place. Spraying may not work well below 5 C
Do not swallow. If swallowed, do not induce vomiting. Call a physician immediately. If affected by fumes, remove patient to fresh air In case of eye contact, wash eyes with water for 15 minuted, In case of prolonged contact with skin, flush thoroughly with water. Dispose of all waste in accordance with federal, state and local regulations.